316L reducer

316L reducer is a tool for connecting pipes of different sizes. The stainless steel reducers can be divided into eccentric stainless steel reducers and concentric stainless steel reducers according to the centerline. When we set stainless steel reducers, the projection of the two ports is concentric circles, that is, concentric stainless steel reducers. The reason why eccentric stainless steel reducers are called eccentric is that the two centers do not coincide, but are in a straight line. These two different stainless steel reducers are also suitable for different ranges

Concentric 316L reducer is used on the vertical pipe, eccentric stainless steel reducer is used on the horizontal pipe, and the bottom or top should be marked flat when using. When the flow of liquid in the pipe changes, the flow requirement is not too large when using stainless steel reducer. Especially in the installation of pump inlet reducer, in order to prevent gas from accumulating at the reducer and avoid cavitation caused by errors during installation, eccentric stainless steel reducer is used for the horizontal inlet pipe of the pump to prevent cavitation. Therefore, eccentric stainless steel reducer shall be used when reducing the horizontal inlet pipe of the pump, so as to fit well with the joints of control valve, flowmeter and other instruments. When the pipe enters the pump horizontally from top to bottom, the stainless steel reducer shall be flat at the bottom

The material of 316L reducer can be divided into stainless steel reducer and alloy steel reducer, and the steel used for stainless steel reducer is 316L steel

In the 316L reducer, the eccentric stainless steel reducer is mainly used as a connecting pipe fitting at the pipe reducer. Eccentric stainless steel reducer is generally formed by shrinking, or it can be pressed by shrinking and expanding process. Stamping method can also be used for some special stainless steel reducers. Eccentric stainless steel reducer can not only produce stainless steel pipes of different diameters with steel pipes as raw materials, but also press some special stainless steel pipes of different diameters with steel plate forming method. According to the internal surface size of the stainless steel reducer, the shape of the die is designed, and the steel plate is cut and stretched with the die

316L reducer is widely used, and many industries can not do without it. The forming process of the surfacing elbow used in the pipeline system is very complex for natural growth gas, water and electricity, construction, oil, boiler, etc. It needs to be welded according to different materials and uses, and cast under a certain pressure