Carbon steel reducer

The carbon steel reducer is also called carbon steel reducer. The reducing forming process is to put the tube blank with the same diameter as the large end of the reducer into the forming die, and make the metal move along the die cavity and shrink to form by pressing along the axial direction of the tube blank. According to the size of reducer reducer, it can be divided into one press forming or multiple press forming

The materials of carbon steel reducers include stainless steel reducers (304304l316316l), alloy steel, carbon steel reducers, and 20 # steel q234q345 of reducers. Eccentric reducer standard: national standard, American standard, British standard and various non-standard high-pressure stamping

The roundness of the carbon steel reducer shall not be greater than 1% of the outer diameter of the corresponding end, and the allowable deviation is ± 3mm. The materials of reducers shall comply with SY/T5037, GB/T9711, GB/T8163, ASTM A106/A53GRB, API 5L, APT5CT, ASTM A105, ASTM A234, ASTM A106, DIN German standards and customer requirements

Material classification

Carbon steel: ASTM A105, 20 Q235, 16Mn, ASTM A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2, ASTM A694 F42, F46, F48, F50, F52, F56, F60, F65, F70

Carbon steel reducer is a kind of pipe fitting used at pipe reducer. The commonly used forming process is reducing, expanding or reducing plus expanding, and stamping can also be used for reducing pipes of certain specifications

Carbon steel reducers are mainly used in industries

1. Carbon steel reducers can be used to control water, gas, steam, oil products and corrosive media in chemical, petroleum, metallurgy, light industry, power, plumbing, food, medicine, fiber, ink and other industries

2. Sanitary valves, fluid pipe fittings, one-to-one pipe fittings and mechanical supporting equipment in special industries can be used in dairy, pharmaceutical, beer, beverage, edible oil and other industries to meet their dedicated service level requirements

3. The products produced according to different standard systems can be suitable for the corresponding supporting equipment standard systems, and non-standard products can be produced according to user requirements, which are suitable for special purposes