Alloy pipe cap

Alloy pipe caps, also known as plugs, caps, pipe covers, and bulkhead, are installed on the external threads of pipe ends to cover pipe fittings. It is used to close the pipeline, with the same function as the pipe plug, but the pipe cap can be directly screwed on the pipe, and no other pipe fittings are required. It is generally used at the sampling port at the end of the pipe. After sampling, screw on the pipe cap. Secondly, in special cases, screw off the pipe cap and connect the pipe to the tap for temporary continuous material collection or extraction. Pipe caps are generally used under low pressure to facilitate disassembly and maintenance, and pipe caps are generally not used under high and medium pressure

The alloy pipe cap is generally used at the sampling port at the end of the pipe. After the sampling is completed, the pipe cap should be screwed on. Secondly, in special cases, after the pipe cap is screwed off, the pipe can be connected to the threaded port for temporary continuous material collection or extraction

The pipe cap is usually used under low pressure, which is easy to disassemble for maintenance. The pipe cap is usually not used under high and medium pressure. The pipe cap includes the design of convex pipe cap, conical shell, reducing section, flat cap and tight mouth. Although the alloy pipe cap is only a small part, it has important significance and role for the development of industry. The tightness, aging and service life of spare parts have an important impact on this equipment. Users should regularly check and maintain the parts and components, and can use lubricating oil to wipe them, so as to extend the service life of the parts. In addition, I want to mention that the specification of parts is also very important. Whether the specification is standard directly affects the use

The alloy pipe cap includes the design of convex pipe cap, conical shell, reducing section, flat cap and tight mouth. The use value of alloy pipe cap and stainless steel elbow is different, and the impression and satisfaction of users will also be different. Therefore, when using pipe cap and stainless steel elbow, pay attention to their different properties and characteristics, and use them according to different environments and use ranges